Hot melt tube is also known as hose, hot melt glue hose, heating hose. The inner liner of the hot melt hose adopts imported Teflon tube, which has good flexibility, anti-sticking property and high temperature resistance (up to 250 degrees), which can greatly reduce the carbonization phenomenon; the heating part adopts heating wire and high temperature wire, uniform The ground is wound on the outer wall of the throat pipe, which has good insulation, uniform heat conduction and high temperature resistance. The use of high-quality thermal insulation materials ensures the thermal insulation performance of the throat pipe.

A corrugated pipe is a pipe with a series of ridges and grooves running parallel to each other on its surface. The ridges and grooves follow a pattern that is perpendicular to and bisecting the centerline of the pipe. Corrugated pipes are made of different materials such as iron, steel, polyvinyl chloride (PVC), or high-density polyethylene (HDPE). Corrugated pipes are used where flexibility is an important factor other than strength and durability, such as in storm drains and culverts. Flexibility makes corrugated pipes more useful and suitable for a wide variety of uses compared to rigid and non-corrugated pipes.

HDPE pipes are widely approved for use in potable cold water applications in Europe and the United States. Additional approvals for some high-temperature formulations have satisfied the standard chemical migration requirements of ANSI/NSF 61 and some European standards organizations.

PVC seven-hole plum blossom pipe is a plum blossom-shaped communication pipe formed by pvc particles as the main material and other formulas through a unique mold. It is also called plum blossom pipe and honeycomb pipe or colorful pipe. The inner wall of this pipe is smooth and can be directly used. Wearing optical cables can save man-hours, its structure is reasonable, its use value is high, and its life span is long.

Polypropylene is available in homopolymer, co-polymer, orthotic, and prosthetic grades. Polypropylene is a versatile polymer used in a plethora of applications that require chemical and corrosion resistance, high impact resistance, and high strength to weight ratio. Polypropylene meets FDA and USDA guidelines, does not absorb moisture and is easy to form. These qualities make polypropylene a very sought after solution for many day-to-day and industrial applications.

Plastomers are used to improve the high temperature (rutting) properties of modified materials.This modifier may be used in combination with polymers to increase the high-temperature stiffness. Other modifiers that may be used include asphalt binder extenders (primarily sulfur) and hydrocarbon materials.

Waterproof fabrics are fabrics that are inherently, or have been treated to become, resistant to penetration by water and wetting. The term "waterproof" refers to conformance to a governing specification and specific conditions of a laboratory test method. They are usually natural or synthetic fabrics that are laminated to or coated with a waterproofing material such as rubber, polyvinyl chloride (PVC), polyurethane (PU), silicone elastomer, fluoropolymers, and wax. Treatment could be either of the fabric during manufacture or of completed products after manufacture, for instance by a waterproofing spray.