High density polyethylene
polypropylene
Polyvinyl chloride
Polyvinyl chloride has the outstanding characteristics of abundant raw materials (oil, limestone, coke, salt and natural gas), mature manufacturing process, low price, and wide range of uses. It has become the second largest general-purpose resin in the world after polyethylene resin. 29% of the world's total synthetic resin consumption. Polyvinyl chloride is easy to process and can be processed by molding, laminating, injection molding, extrusion, calendering, blow molding, etc. Polyvinyl chloride is mainly used to produce soft plastic products such as artificial leather, films, and wire sheaths, as well as hard plastic products such as plates, doors and windows, pipes and valves. Polyvinyl chloride is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydrochloric acid, 90% sulfuric acid, 60% nitric acid and 20% sodium hydroxide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80°C, it starts to decompose and change color at 130°C, and precipitate HCI.
Choose your Fabrication Process type
ALL
ALL
ALL
Characteristics, Features
Choose your Application Industry type
Large diameter pipe (grade 80)
Used for producing 100 grade pipes
Mainly used for the production of water supply pipes and gas pipes (grade 100)
Choose your Application Industry type
Mainly used for cold water pipes
Mainly used for hot water pipes
Choose your Application Industry type
Mainly used to produce soft products, hoses, wires and cables, films, shoe materials, toys and auto parts.
Mainly used to produce pipes, profiles, plates, etc.
Category
Agricultural film, shed film and a variety of general packaging film
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
18D | 1.1-1.9 | Suitable for agricultural film, shed film and all kinds of general packaging film | DOWNLOAD |
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
2426K | 4 | Suitable for all kinds of packaging film and high transparent film | DOWNLOAD |
Vest bag,Shopping bags
fishing net,rope
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5000S | 0.700~1.30 | High mechanical strength, suitable for making small hollow vessels, agricultural film, rope and other silk, etc | DOWNLOAD |
6094 | 0.700~1.30 | Fishing net silk, textile cloth, hollow products | DOWNLOAD |
7750M | 2.2~2.8 | Copolymerization of single peak high strength single filaments, ropes, fishing nets, etc | DOWNLOAD |
Bottle
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5050 | Special material for bottle cap | NO DOWNLOAD |
63 grade pipes
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
4801EX | Suitable for the production of HDPE pipes, used for the production of industrial pipes (grade 63) | NO DOWNLOAD |
Less than 5 liters of container
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5502 | 0.19-0.31 | Hollow: Small hollow container used for the production of chemicals, household products, oil and food containers | DOWNLOAD |
6200 | 23-33 | Hollow: Small hollow container (less than 5 l), suitable for chemicals, household products, oil and food | DOWNLOAD |
B53-35H-011 | 0.35 | Packaging bottles, drums, automobile water tanks and other industrial products, up to 30L packaging containers, household chemicals, pharmaceuticals and cosmetics containers | DOWNLOAD |
5621D | 0.35 | Small hollow, especially suitable for food and drug packaging | DOWNLOAD |
Agricultural film, shed film
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
0209AA | 0.8~1.2 | Agricultural film | DOWNLOAD |
9047 | 0.6~1.1 | Agricultural film, shed film | DOWNLOAD |
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
7042N | 1.7~2.3 | Plastic film, jewelry packaging bags, coating | DOWNLOAD |
7042H | 1.7~2.3 | lining,Agricultural film | DOWNLOAD |
HPR1018HA | 0.7~1.3 | Shed film, plastic film, flexible packaging film, heavy packaging film | DOWNLOAD |
EZP2010HA | 0.7~1.3 | Shed film, plastic film | DOWNLOAD |
F218W | 1.7~2.2 | lining,Agricultural film | DOWNLOAD |
35B | 1.8~2.2 | Agricultural film | DOWNLOAD |
Stretching BOPP film
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
L5D98 | 2.6~4.2 | BOPP film | DOWNLOAD |
Woven products
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
All kinds of plastic toys, household items
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
V30G | 13-21 | All kinds of plastic toys, household items | DOWNLOAD |
HP500N-Z | 12 | Home appliance products, daily products, modification, toys, LIDS, toilet lid | DOWNLOAD |
1100N | 8.4~15.6 | Toys, containers | DOWNLOAD |
8320 | 17~23 | High quality household utensils, toys, dustbins, containers, especially for the production of thin wall products | DOWNLOAD |
Polypropylene chip
Low fusion means copolymerization
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
Acrylonitrile-Butadiene-Styrene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
H-08 | 0.5~1.5 | Low temperature resistant, used in industry | DOWNLOAD |
0215A | 18~24 | Used for air conditioning shell, mechanical instruments | DOWNLOAD |
0215H | 18~24 | Used for Gree and Midea special materials | DOWNLOAD |
GE-150 | 18~24 | Used for household appliances, auto parts, refrigerator lining, etc | DOWNLOAD |
750A | 25~36 | Can replace metal, wood, widely used in household appliances, instruments, building materials, furniture, automotive industry, toys, light industry and other departments of all kinds of pipes, rods, profiles extrusion and vacuum blister products | DOWNLOAD |
Styreneic Block Copolymers
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
T6302H | The structure of T6302H is linear, mainly used as road modified asphalt, which can significantly improve road deformation resistance, reduce rutting, prevent wave and bale phenomenon | NO DOWNLOAD | |
H3591 | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD | |
791H | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD | |
JH7302 | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD |
Plastic wrap
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
0209AA | 0.8~1.2 | Agricultural film | DOWNLOAD |
9047 | 0.6~1.1 | Agricultural film, shed film | DOWNLOAD |
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
7042N | 1.7~2.3 | Plastic film, jewelry packaging bags, coating | DOWNLOAD |
7042H | 1.7~2.3 | lining,Agricultural film | DOWNLOAD |
HPR1018HA | 0.7~1.3 | Shed film, plastic film, flexible packaging film, heavy packaging film | DOWNLOAD |
EZP2010HA | 0.7~1.3 | Shed film, plastic film | DOWNLOAD |
F218W | 1.7~2.2 | lining,Agricultural film | DOWNLOAD |
35B | 1.8~2.2 | Agricultural film | DOWNLOAD |
Medical packaging
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
GPPS-500N | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500 | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500NT | 4.0-6.0 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
Hot melt tube
Toy
Auto Parts
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
K8009 | 7.5~10.5 | Battery case, auto parts, home appliances | DOWNLOAD |
SP179 | 8~11 | Car external veneer and injection parts, bumpers, etc | DOWNLOAD |
2348M | 5.5~9.5 | Battery case, auto parts, home appliances | DOWNLOAD |
EP300M-Z | 9 | Home appliance products, toys, daily products, daily chemical packaging, battery, casters | DOWNLOAD |
FC709M | 9~12 | Suitable for injection molding, widely used in home appliances, automobile industry | DOWNLOAD |
Welcome mat, door mat
Plastic container
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5000S | 0.700~1.30 | High mechanical strength, suitable for making small hollow vessels, agricultural film, rope and other silk, etc | DOWNLOAD |
5502 | 0.19-0.31 | Hollow: Small hollow container used for the production of chemicals, household products, oil and food containers | DOWNLOAD |
6200 | 23-33 | Hollow: Small hollow container (less than 5 l), suitable for chemicals, household products, oil and food | DOWNLOAD |
B53-35H-011 | 0.35 | Packaging bottles, drums, automobile water tanks and other industrial products, up to 30L packaging containers, household chemicals, pharmaceuticals and cosmetics containers | DOWNLOAD |
5621D | 0.35 | Small hollow, especially suitable for food and drug packaging | DOWNLOAD |
5300B | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | NO DOWNLOAD | |
6147 | 7~13 | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | DOWNLOAD |
5420 | 1.5-2.5 | Suitable for large-scale blow molding production, used for the production of large blow molding containers with the greatest demand for toughness, 220l tank for chemicals, etc. | DOWNLOAD |
4506 | 5.5-7.5 | IBC barrel is characterized by large rigidity, creep resistance, corrosion resistance, wear resistance, high space utilization, good sanitation, safety and reliability, etc. It is widely used in the packaging, storage, transportation and turnover of petrochemical, medicine, food, coating, liquid and dangerous goods, etc.The new product has high rigidity and high impact resistance | DOWNLOAD |
8320 | 17~23 | High quality household utensils, toys, dustbins, containers, especially for the production of thin wall products | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
Linear low density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
0209AA | 0.8~1.2 | Agricultural film | DOWNLOAD |
9047 | 0.6~1.1 | Agricultural film, shed film | DOWNLOAD |
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
7042N | 1.7~2.3 | Plastic film, jewelry packaging bags, coating | DOWNLOAD |
7042H | 1.7~2.3 | lining,Agricultural film | DOWNLOAD |
HPR1018HA | 0.7~1.3 | Shed film, plastic film, flexible packaging film, heavy packaging film | DOWNLOAD |
EZP2010HA | 0.7~1.3 | Shed film, plastic film | DOWNLOAD |
F218W | 1.7~2.2 | lining,Agricultural film | DOWNLOAD |
35B | 1.8~2.2 | Agricultural film | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
L5D98 | 2.6~4.2 | BOPP film | DOWNLOAD |
CP35F | Special material for CPP aluminum coating | NO DOWNLOAD | |
W0723F | 6~9 | Suitable for high quality packaging film and the formation of composite high quality packaging film with other PP films CPP thermal seal layer | DOWNLOAD |
DY-725EF | Special CPP corona layer for casting film | NO DOWNLOAD | |
TF1007 | 6~9 | Three - yuan CPP heat seal layer, including opening agent and smoothing agent | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
V30G | 13-21 | All kinds of plastic toys, household items | DOWNLOAD |
HP500N-Z | 12 | Home appliance products, daily products, modification, toys, LIDS, toilet lid | DOWNLOAD |
1100N | 8.4~15.6 | Toys, containers | DOWNLOAD |
K1860 | 50~70 | Thin-walled plastic injection, disposable lunch box | DOWNLOAD |
H9018H | 62~76 | Thin-walled plastic injection, disposable lunch box | DOWNLOAD |
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
K8009 | 7.5~10.5 | Battery case, auto parts, home appliances | DOWNLOAD |
SP179 | 8~11 | Car external veneer and injection parts, bumpers, etc | DOWNLOAD |
2348M | 5.5~9.5 | Battery case, auto parts, home appliances | DOWNLOAD |
EP300M-Z | 9 | Home appliance products, toys, daily products, daily chemical packaging, battery, casters | DOWNLOAD |
FC709M | 9~12 | Suitable for injection molding, widely used in home appliances, automobile industry | DOWNLOAD |
K9928H | 25~35 | Washing machine and blending modification | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
BH | 20~28 | Polypropylene chip | DOWNLOAD |
BL | 16~22 | Polypropylene chip | DOWNLOAD |
Z30S | 18-32 | Suitable for drawing, low denier short fiber, fixed length fiber, non-woven cloth, BCF and CF multi-fiber, cigarette holder silk, filter silk, etc | DOWNLOAD |
S2040 | 33~41 | High speed spinning, fine denier staple fiber, continuous filament, non-woven raw materials | DOWNLOAD |
S900 | 28~40 | Textiles and spinning products | DOWNLOAD |
H39S-2 | 40-50 | Bundling, packing bag, steering wheel cover | DOWNLOAD |
1101S | 23~29 | High speed spinning, carpet, sportswear, bags | DOWNLOAD |
1101SC | 25~45 | Eisai non-woven cloth | DOWNLOAD |
polypropylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
4228 | 0.25~0.5 | Mainly used for cold water pipes | DOWNLOAD |
DY-ZK0640P | 0.3~0.7 | Mainly used for cold water pipes | DOWNLOAD |
T4401 | 0.2~0.3 | Mainly used for hot water pipes | DOWNLOAD |
PA14D | 0.22~0.3 | Mainly used for hot water pipes | DOWNLOAD |
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
Low density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
18D | 1.1-1.9 | Suitable for agricultural film, shed film and all kinds of general packaging film | DOWNLOAD |
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
2426K | 4 | Suitable for all kinds of packaging film and high transparent film | DOWNLOAD |
1810D | 0.20-0.40 | Used for processing pipe coating, coaxial cable insulation layer, heavy packing bag and heat shrink film | DOWNLOAD |
2240H | 2.1-2.5 | Crosslinked cable insulation material | DOWNLOAD |
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
18G | 6.2-7.8 | The inner and outer coating of the plastic woven bag | DOWNLOAD |
LD251 | 7.2-8.8 | The inner and outer coating of the plastic woven bag | DOWNLOAD |
High density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5502 | 0.19-0.31 | Hollow: Small hollow container used for the production of chemicals, household products, oil and food containers | DOWNLOAD |
6200 | 23-33 | Hollow: Small hollow container (less than 5 l), suitable for chemicals, household products, oil and food | DOWNLOAD |
B53-35H-011 | 0.35 | Packaging bottles, drums, automobile water tanks and other industrial products, up to 30L packaging containers, household chemicals, pharmaceuticals and cosmetics containers | DOWNLOAD |
5621D | 0.35 | Small hollow, especially suitable for food and drug packaging | DOWNLOAD |
5300B | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | NO DOWNLOAD | |
6147 | 7~13 | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | DOWNLOAD |
5420 | 1.5-2.5 | Suitable for large-scale blow molding production, used for the production of large blow molding containers with the greatest demand for toughness, 220l tank for chemicals, etc. | DOWNLOAD |
4506 | 5.5-7.5 | IBC barrel is characterized by large rigidity, creep resistance, corrosion resistance, wear resistance, high space utilization, good sanitation, safety and reliability, etc. It is widely used in the packaging, storage, transportation and turnover of petrochemical, medicine, food, coating, liquid and dangerous goods, etc.The new product has high rigidity and high impact resistance | DOWNLOAD |
Large diameter pipe (grade 80)
Medical injection bottle
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
Medical packaging
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
Mainly used for cold water pipes
Mainly used to produce soft products, hoses, wires and cables, films, shoe materials, toys and auto parts.
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
SG3 | 70.5-74.2 | Mainly used to produce soft products, hoses, wires and cables, films, shoe materials, toys and auto parts. | DOWNLOAD |
Pipe coating, insulating material, heavy packing bag and heat shrinkable film
Bottle caps, recycling bins, bins
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
8008H | 6.5~8.5 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
T60-800 | 8.5 | Mainly used for the production of general hard items, such as: crates, turnover boxes, baskets, seats, pallets, etc | DOWNLOAD |
7260 | 21~25 | Transportation box, turnover box, beer basket | DOWNLOAD |
8920 | 17~23 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
2911 | 17.5~22.5 | Furniture, recycling bins, large bins, etc | DOWNLOAD |
2911FS | Used for producing low point composite staple fiber | NO DOWNLOAD |
80 grade pipes
Above 25 litres, below 50 litres containers
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5300B | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | NO DOWNLOAD | |
6147 | 7~13 | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | DOWNLOAD |
Stretch the CPP film
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
CP35F | Special material for CPP aluminum coating | NO DOWNLOAD | |
W0723F | 6~9 | Suitable for high quality packaging film and the formation of composite high quality packaging film with other PP films CPP thermal seal layer | DOWNLOAD |
DY-725EF | Special CPP corona layer for casting film | NO DOWNLOAD | |
TF1007 | 6~9 | Three - yuan CPP heat seal layer, including opening agent and smoothing agent | DOWNLOAD |
disposable lunch box
High speed spinning, textiles
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
Z30S | 18-32 | Suitable for drawing, low denier short fiber, fixed length fiber, non-woven cloth, BCF and CF multi-fiber, cigarette holder silk, filter silk, etc | DOWNLOAD |
S2040 | 33~41 | High speed spinning, fine denier staple fiber, continuous filament, non-woven raw materials | DOWNLOAD |
S900 | 28~40 | Textiles and spinning products | DOWNLOAD |
H39S-2 | 40-50 | Bundling, packing bag, steering wheel cover | DOWNLOAD |
1101S | 23~29 | High speed spinning, carpet, sportswear, bags | DOWNLOAD |
Central fusion finger copolymerization
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
K8009 | 7.5~10.5 | Battery case, auto parts, home appliances | DOWNLOAD |
SP179 | 8~11 | Car external veneer and injection parts, bumpers, etc | DOWNLOAD |
2348M | 5.5~9.5 | Battery case, auto parts, home appliances | DOWNLOAD |
EP300M-Z | 9 | Home appliance products, toys, daily products, daily chemical packaging, battery, casters | DOWNLOAD |
FC709M | 9~12 | Suitable for injection molding, widely used in home appliances, automobile industry | DOWNLOAD |
Polystyrene (diphenyl)
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
GPPS-500N | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500 | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500NT | 4.0-6.0 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
Synthetic Rubber
Product(GRADE) | Mooney viscosity, ML (1+4) 100℃ | Usage | |
---|---|---|---|
3305E | 50-60 | Environmental friendly nitrile rubber meets the requirements of THE European Union, used in automobile, drilling, engineering hydraulic hose of the middle rubber layer, the inside rubber layer, textile cots, printing cots, fitness equipment and sports equipment jacket materials and other insulating foam materials, oil tank lining, oil-resistant seal and miscellaneous parts | DOWNLOAD |
3308E | 75-85 | In line with the European Union requirements of environmental protection of nitrile rubber, used for building, refrigeration systems and other insulation foam, oil resistant sealing and miscellaneous parts | DOWNLOAD |
N41E | 72-82 | Suitable for rubber lining, inner rubber lining, textile rubber roller, printing rubber roller, Solon, building insulation and refrigeration system insulation foaming material, sports sole and labor insurance sole, oil tank lining, oil-resistant seal, rubber parts, etc | DOWNLOAD |
Mulch films
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
18D | 1.1-1.9 | Suitable for agricultural film, shed film and all kinds of general packaging film | DOWNLOAD |
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
2426K | 4 | Suitable for all kinds of packaging film and high transparent film | DOWNLOAD |
0209AA | 0.8~1.2 | Agricultural film | DOWNLOAD |
9047 | 0.6~1.1 | Agricultural film, shed film | DOWNLOAD |
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
7042N | 1.7~2.3 | Plastic film, jewelry packaging bags, coating | DOWNLOAD |
7042H | 1.7~2.3 | lining,Agricultural film | DOWNLOAD |
HPR1018HA | 0.7~1.3 | Shed film, plastic film, flexible packaging film, heavy packaging film | DOWNLOAD |
EZP2010HA | 0.7~1.3 | Shed film, plastic film | DOWNLOAD |
F218W | 1.7~2.2 | lining,Agricultural film | DOWNLOAD |
35B | 1.8~2.2 | Agricultural film | DOWNLOAD |
Medical nonwovens
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
Z30S | 18-32 | Suitable for drawing, low denier short fiber, fixed length fiber, non-woven cloth, BCF and CF multi-fiber, cigarette holder silk, filter silk, etc | DOWNLOAD |
S2040 | 33~41 | High speed spinning, fine denier staple fiber, continuous filament, non-woven raw materials | DOWNLOAD |
1101SC | 25~45 | Eisai non-woven cloth | DOWNLOAD |
Water pipe, corrugated pipe, Floor heating pipe
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
4801EX | Suitable for the production of HDPE pipes, used for the production of industrial pipes (grade 63) | NO DOWNLOAD | |
2480 | 8~14 | Large diameter pipe (grade 80) | DOWNLOAD |
2400 | 8~14 | Can be used to prepare large-diameter and thick-walled pipes (grade 80) | DOWNLOAD |
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
N3000 | 0.23~0.35 | Used for producing 100 grade pipes | DOWNLOAD |
N3000B | 0.24~0.36 | With excellent processing performance, mainly used for the production of water supply pipes and gas pipes (grade 100) | DOWNLOAD |
Electrical shell
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
K8009 | 7.5~10.5 | Battery case, auto parts, home appliances | DOWNLOAD |
2348M | 5.5~9.5 | Battery case, auto parts, home appliances | DOWNLOAD |
EP300M-Z | 9 | Home appliance products, toys, daily products, daily chemical packaging, battery, casters | DOWNLOAD |
FC709M | 9~12 | Suitable for injection molding, widely used in home appliances, automobile industry | DOWNLOAD |
0215A | 18~24 | Used for air conditioning shell, mechanical instruments | DOWNLOAD |
0215H | 18~24 | Used for Gree and Midea special materials | DOWNLOAD |
GE-150 | 18~24 | Used for household appliances, auto parts, refrigerator lining, etc | DOWNLOAD |
750A | 25~36 | Can replace metal, wood, widely used in household appliances, instruments, building materials, furniture, automotive industry, toys, light industry and other departments of all kinds of pipes, rods, profiles extrusion and vacuum blister products | DOWNLOAD |
GPPS-500N | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500 | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500NT | 4.0-6.0 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
Bumper
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
SP179 | 8~11 | Car external veneer and injection parts, bumpers, etc | DOWNLOAD |
high-speed spinning
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
Z30S | 18-32 | Suitable for drawing, low denier short fiber, fixed length fiber, non-woven cloth, BCF and CF multi-fiber, cigarette holder silk, filter silk, etc | DOWNLOAD |
S2040 | 33~41 | High speed spinning, fine denier staple fiber, continuous filament, non-woven raw materials | DOWNLOAD |
1101S | 23~29 | High speed spinning, carpet, sportswear, bags | DOWNLOAD |
1101SC | 25~45 | Eisai non-woven cloth | DOWNLOAD |
High density polyethylene
High density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5000S | 0.700~1.30 | High mechanical strength, suitable for making small hollow vessels, agricultural film, rope and other silk, etc | DOWNLOAD |
6094 | 0.700~1.30 | Fishing net silk, textile cloth, hollow products | DOWNLOAD |
7750M | 2.2~2.8 | Copolymerization of single peak high strength single filaments, ropes, fishing nets, etc | DOWNLOAD |
Acrylonitrile-Butadiene-Styrene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
H-08 | 0.5~1.5 | Low temperature resistant, used in industry | DOWNLOAD |
0215A | 18~24 | Used for air conditioning shell, mechanical instruments | DOWNLOAD |
0215H | 18~24 | Used for Gree and Midea special materials | DOWNLOAD |
GE-150 | 18~24 | Used for household appliances, auto parts, refrigerator lining, etc | DOWNLOAD |
750A | 25~36 | Can replace metal, wood, widely used in household appliances, instruments, building materials, furniture, automotive industry, toys, light industry and other departments of all kinds of pipes, rods, profiles extrusion and vacuum blister products | DOWNLOAD |
High density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
6094 | 0.700~1.30 | Fishing net silk, textile cloth, hollow products | DOWNLOAD |
7750M | 2.2~2.8 | Copolymerization of single peak high strength single filaments, ropes, fishing nets, etc | DOWNLOAD |
4801EX | Suitable for the production of HDPE pipes, used for the production of industrial pipes (grade 63) | NO DOWNLOAD | |
2480 | 8~14 | Large diameter pipe (grade 80) | DOWNLOAD |
2400 | 8~14 | Can be used to prepare large-diameter and thick-walled pipes (grade 80) | DOWNLOAD |
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
N3000 | 0.23~0.35 | Used for producing 100 grade pipes | DOWNLOAD |
N3000B | 0.24~0.36 | With excellent processing performance, mainly used for the production of water supply pipes and gas pipes (grade 100) | DOWNLOAD |
Plastic containers above 25 litres and below 50 litres
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5300B | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | NO DOWNLOAD | |
6147 | 7~13 | Medium hollow material, suitable for manufacture of containers up to 25 l and up to 50 l | DOWNLOAD |
infusion bag
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
Mainly used for hot water pipes
Infusion bottle
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
Medical packaging
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
Large container
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5420 | 1.5-2.5 | Suitable for large-scale blow molding production, used for the production of large blow molding containers with the greatest demand for toughness, 220l tank for chemicals, etc. | DOWNLOAD |
4506 | 5.5-7.5 | IBC barrel is characterized by large rigidity, creep resistance, corrosion resistance, wear resistance, high space utilization, good sanitation, safety and reliability, etc. It is widely used in the packaging, storage, transportation and turnover of petrochemical, medicine, food, coating, liquid and dangerous goods, etc.The new product has high rigidity and high impact resistance | DOWNLOAD |
100 grade pipes
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
N3000 | 0.23~0.35 | Used for producing 100 grade pipes | DOWNLOAD |
N3000B | 0.24~0.36 | With excellent processing performance, mainly used for the production of water supply pipes and gas pipes (grade 100) | DOWNLOAD |
PPB pipe fittings
Eisai non-woven cloth
High melting point copolymerization
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
K9928H | 25~35 | Washing machine and blending modification | DOWNLOAD |
High impact polystyrene (modified benzene)
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
HIE | It is mainly used for food packaging, hot forming board products, sales cup, side extrusion, pharmaceutical packaging, hard packaging, refrigerator components, flame retardant additives, electrical and electronic inner parts | NO DOWNLOAD | |
HIE-1 | 2~4 | It is mainly used for food packaging, hot forming board products, sales cup, side extrusion, pharmaceutical packaging, hard packaging, refrigerator components, flame retardant additives, electrical and electronic inner parts | DOWNLOAD |
HIEM | 3.9~5.74 | It is mainly used for food packaging, hot forming board products, sales cup, side extrusion, pharmaceutical packaging, hard packaging, refrigerator components, flame retardant additives, electrical and electronic inner parts | DOWNLOAD |
Greenhouse films
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
18D | 1.1-1.9 | Suitable for agricultural film, shed film and all kinds of general packaging film | DOWNLOAD |
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
2426K | 4 | Suitable for all kinds of packaging film and high transparent film | DOWNLOAD |
0209AA | 0.8~1.2 | Agricultural film | DOWNLOAD |
9047 | 0.6~1.1 | Agricultural film, shed film | DOWNLOAD |
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
7042N | 1.7~2.3 | Plastic film, jewelry packaging bags, coating | DOWNLOAD |
7042H | 1.7~2.3 | lining,Agricultural film | DOWNLOAD |
HPR1018HA | 0.7~1.3 | Shed film, plastic film, flexible packaging film, heavy packaging film | DOWNLOAD |
EZP2010HA | 0.7~1.3 | Shed film, plastic film | DOWNLOAD |
F218W | 1.7~2.2 | lining,Agricultural film | DOWNLOAD |
35B | 1.8~2.2 | Agricultural film | DOWNLOAD |
Medical glove
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
3305E | 50-60 | Environmental friendly nitrile rubber meets the requirements of THE European Union, used in automobile, drilling, engineering hydraulic hose of the middle rubber layer, the inside rubber layer, textile cots, printing cots, fitness equipment and sports equipment jacket materials and other insulating foam materials, oil tank lining, oil-resistant seal and miscellaneous parts | DOWNLOAD |
3308E | 75-85 | In line with the European Union requirements of environmental protection of nitrile rubber, used for building, refrigeration systems and other insulation foam, oil resistant sealing and miscellaneous parts | DOWNLOAD |
N41E | 72-82 | Suitable for rubber lining, inner rubber lining, textile rubber roller, printing rubber roller, Solon, building insulation and refrigeration system insulation foaming material, sports sole and labor insurance sole, oil tank lining, oil-resistant seal, rubber parts, etc | DOWNLOAD |
Agricultural drinking water pipe
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
Vest plastic bag
Battery slot
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
K8009 | 7.5~10.5 | Battery case, auto parts, home appliances | DOWNLOAD |
2348M | 5.5~9.5 | Battery case, auto parts, home appliances | DOWNLOAD |
Plastic textile
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
BH | 20~28 | Polypropylene chip | DOWNLOAD |
BL | 16~22 | Polypropylene chip | DOWNLOAD |
Z30S | 18-32 | Suitable for drawing, low denier short fiber, fixed length fiber, non-woven cloth, BCF and CF multi-fiber, cigarette holder silk, filter silk, etc | DOWNLOAD |
S2040 | 33~41 | High speed spinning, fine denier staple fiber, continuous filament, non-woven raw materials | DOWNLOAD |
S900 | 28~40 | Textiles and spinning products | DOWNLOAD |
H39S-2 | 40-50 | Bundling, packing bag, steering wheel cover | DOWNLOAD |
1101S | 23~29 | High speed spinning, carpet, sportswear, bags | DOWNLOAD |
1101SC | 25~45 | Eisai non-woven cloth | DOWNLOAD |
Low density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
18D | 1.1-1.9 | Suitable for agricultural film, shed film and all kinds of general packaging film | DOWNLOAD |
2426F | 0.6-0.9 | Health membrane | DOWNLOAD |
2426K | 4 | Suitable for all kinds of packaging film and high transparent film | DOWNLOAD |
1810D | 0.20-0.40 | Used for processing pipe coating, coaxial cable insulation layer, heavy packing bag and heat shrink film | DOWNLOAD |
2240H | 2.1-2.5 | Crosslinked cable insulation material | DOWNLOAD |
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
18G | 6.2-7.8 | The inner and outer coating of the plastic woven bag | DOWNLOAD |
LD251 | 7.2-8.8 | The inner and outer coating of the plastic woven bag | DOWNLOAD |
Polystyrene (diphenyl)
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
GPPS-500N | 3.5-6.5 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
GPPS-500NT | 4.0-6.0 | Mainly used in medical packaging, laboratory test items, cosmetics packaging, insulation, electrical packaging, CD cases, lighting equipment, radio components, displays | DOWNLOAD |
Linear low density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
Large plastic container
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5420 | 1.5-2.5 | Suitable for large-scale blow molding production, used for the production of large blow molding containers with the greatest demand for toughness, 220l tank for chemicals, etc. | DOWNLOAD |
4506 | 5.5-7.5 | IBC barrel is characterized by large rigidity, creep resistance, corrosion resistance, wear resistance, high space utilization, good sanitation, safety and reliability, etc. It is widely used in the packaging, storage, transportation and turnover of petrochemical, medicine, food, coating, liquid and dangerous goods, etc.The new product has high rigidity and high impact resistance | DOWNLOAD |
infusion tube
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
Used for producing 100 grade pipes
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
N3000 | 0.23~0.35 | Used for producing 100 grade pipes | DOWNLOAD |
Infusion bottle cap
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
The inner and outer coating of the plastic woven bag
PPR pipe fittings
Medical packaging
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
Agricultural irrigation pipe
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
7042 | 1.7~2.3 | lining,Agricultural film,Packing film for daily use | DOWNLOAD |
Electric plum tube
Disposable bento box
Woven Polypropylene Bag
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
Plastic barrels
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
8008H | 6.5~8.5 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
T60-800 | 8.5 | Mainly used for the production of general hard items, such as: crates, turnover boxes, baskets, seats, pallets, etc | DOWNLOAD |
7260 | 21~25 | Transportation box, turnover box, beer basket | DOWNLOAD |
8920 | 17~23 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
2911 | 17.5~22.5 | Furniture, recycling bins, large bins, etc | DOWNLOAD |
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
2500H | 1.4~2.6 | Injection molded products, such as battery tank, automobile and motorcycle parts, paint bucket, child car parts, children's toys and other small injection molded parts, can also be used for extruding agricultural water pipes | DOWNLOAD |
Linear low density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
8320 | 17~23 | High quality household utensils, toys, dustbins, containers, especially for the production of thin wall products | DOWNLOAD |
syringe
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
LD26D | 0.24-0.36 | Medical injection bottle, infusion bag, infusion tube and syringe, etc.Mainly used to make ampoules | DOWNLOAD |
Mainly used for the production of water supply pipes and gas pipes (grade 100)
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
N3000B | 0.24~0.36 | With excellent processing performance, mainly used for the production of water supply pipes and gas pipes (grade 100) | DOWNLOAD |
Medicine
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
RP260 | 7.0-9.0 | Medical packaging,Infusion bottle, infusion bottle cap, medicine bottle, etc. | DOWNLOAD |
Agricultural drinking water pipe
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
100S | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
100N | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
4808 | 4.8~7.2 | Used for producing 100 grade pipes | DOWNLOAD |
PN049 | 0.22~0.38 | Used for producing 100 grade pipes | DOWNLOAD |
23050 | 0.20~0.26 | Used for producing 100 grade pipes | DOWNLOAD |
L7100M | 0.2~0.3 | Used for producing 100 grade pipes | DOWNLOAD |
Polypropylene sheet
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
7750M | 2.2~2.8 | Copolymerization of single peak high strength single filaments, ropes, fishing nets, etc | DOWNLOAD |
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
EPS30R | 0.7~2.3 | Heavy (load) packing, circulation box, paint bucket, etc | DOWNLOAD |
K8003 | 2~3 | Injection molding, production of battery case, recycling box, home appliance case, electrical insulation materials, etc | DOWNLOAD |
CI36D | 2~3 | Low melting, in practical application, can be used as industrial barrels, organic oil barrels, etc., can also be used as power pipes, drainage pipes, such as the inner wall | DOWNLOAD |
Disposable plastic cup
Product(GRADE) | Melt mass flow rate,g/10min | Usage |
---|
Plastic sheets
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
S1003 | 2.4~3.5 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
T30S | 2.8~3.2 | Suitable for making textile single silk, (cut) film, used for packing bag, carpet backing (base cloth), twisting, cable, (shading or covering) color strip cloth, dogging bag and other silk | DOWNLOAD |
L5E89 | 2.8-3.8 | Woven bags, textiles and monofilament | DOWNLOAD |
1102K | 2.7~4 | Woven products, sheets | DOWNLOAD |
HP550J | 3.2 | Home appliance products, daily chemical packaging, toys, straws, stationery sheet, hot forming, single wire, flat wire | DOWNLOAD |
BOPP film
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
L5D98 | 2.6~4.2 | BOPP film | DOWNLOAD |
Fishing net、mooring rope
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
5000S | 0.700~1.30 | High mechanical strength, suitable for making small hollow vessels, agricultural film, rope and other silk, etc | DOWNLOAD |
6094 | 0.700~1.30 | Fishing net silk, textile cloth, hollow products | DOWNLOAD |
7750M | 2.2~2.8 | Copolymerization of single peak high strength single filaments, ropes, fishing nets, etc | DOWNLOAD |
Asphalt modifier
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
T6302H | The structure of T6302H is linear, mainly used as road modified asphalt, which can significantly improve road deformation resistance, reduce rutting, prevent wave and bale phenomenon | NO DOWNLOAD | |
H3591 | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD | |
791H | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD | |
JH7302 | Mainly used as road modified asphalt, it can significantly improve the road deformation resistance, reduce rutting, prevent waves, wrap phenomenon | NO DOWNLOAD |
CPP films
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
CP35F | Special material for CPP aluminum coating | NO DOWNLOAD | |
W0723F | 6~9 | Suitable for high quality packaging film and the formation of composite high quality packaging film with other PP films CPP thermal seal layer | DOWNLOAD |
DY-725EF | Special CPP corona layer for casting film | NO DOWNLOAD | |
TF1007 | 6~9 | Three - yuan CPP heat seal layer, including opening agent and smoothing agent | DOWNLOAD |
Special material for milk tea cup
Product(GRADE) | Melt mass flow rate,g/10min | Usage |
---|
Waterproof material
Product(GRADE) | Melt mass flow rate,g/10min | Usage |
---|
Bubble wrap
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
2426H | 2 | Agricultural film, greenhouse film, packaging film, logistics bag, etc., in the extrusion products also have a certain application | DOWNLOAD |
1810D | 0.20-0.40 | Used for processing pipe coating, coaxial cable insulation layer, heavy packing bag and heat shrink film | DOWNLOAD |
High density polyethylene
Product(GRADE) | Melt mass flow rate,g/10min | Usage | |
---|---|---|---|
8008H | 6.5~8.5 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
T60-800 | 8.5 | Mainly used for the production of general hard items, such as: crates, turnover boxes, baskets, seats, pallets, etc | DOWNLOAD |
7260 | 21~25 | Transportation box, turnover box, beer basket | DOWNLOAD |
8920 | 17~23 | Circulating boxes, baskets, buckets and other daily necessities | DOWNLOAD |
2911 | 17.5~22.5 | Furniture, recycling bins, large bins, etc | DOWNLOAD |
2911FS | Used for producing low point composite staple fiber | NO DOWNLOAD |
Mainly used to produce pipes, profiles, plates, etc.
Agricultural irrigation pipe
Product(GRADE) | Melt mass flow rate,g/10min | Usage |
---|
Contact us, you'll receive exclusive offers and always be in the know about new product announcements and specials!